Select Page

CCEC 50Hz KTA19-G2 Industrial Generator Set

DCEC 6BT5.9-C115 Industrial engine is a 6-cylinders in line, 5.9 liter four-strokes engine with 102 mm bore and 120 mm stroke. Equipped with Weifu A pump and RSV governor, engine comes with turbocharger.

The prime power for generator set 2000 RPM of DCEC 6BT5.9-C115 Industrial engine is 85 kW.

As part of EMAC, ConeMac provides industrial power pack solution that integrated with air intake, air exhaust, cooling system, control system, transmission and hydraulic accessories, We also supplying special products such as explosion proof engine, generator and water pump set, as well as ultra-low temperature condition engine power pack.

We provide full life cycle services for all customers, from design to power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from trouble shooting to overhaul technical support.

Advantages of DCEC 6BT5.9-C115 Industrial Engine

  • It is synchronized with DCEC’ advanced design and sophisticated manufacturing, adapts to harsh working conditions, and has high-intensity and heavy-duty work capabilities.

  • The Holset wastegate valve makes the low speed performance more perfect and the power performance better.

  • The cylinder block and cylinder head adopt integrated design to prevent the occurrence of engine water and oil leakage. The parts are 40% less than other similar engines, and the failure rate is greatly reduced.

  • Using forged steel camshaft and crankshaft, high-strength cylinder design, many parts are cast on the cylinder, with high rigidity, high pressure resistance, good reliability and longer service life.

  • The cylinder liner adopts a platform mesh honing design, which effectively prevents oil leakage with a perfect geometric structure, and adopts advanced technology such as new piston ring components and gasket crimping molding to reduce oil loss.

Technical Specifications

Engine Model:6BT5.9-C115
Engine Type:6 Cylinders, in Line
Displacement:5.9 L
Rated Speed:2000 RPM
Rated Power:115 HP @ 2000 RPM
Peak Torque:430 N.m @ 1500 RPM
Fuel System:Weifu PW Pump / RSV Mechanical Governor
Aspiration Method:Turbocharged
Emission Standard:N / A
Bore*Storke:102 mm * 120 mm
Packing Size(L*W*H):1026 mm * 699 mm * 912 mm
Wet Weight:432 kg
Lead Time:15-30 Working Days
Payment Terms:T/T ,L/C

Coming Soon

[wpvr id=”385425″]

Generrator Model

Engine Model

StandbyV

Prime

Generator Dimension

KTA19-G2KTA19-G2KTA19-G2KTA19-G2KTA19-G2
KTA19-G2KTA19-G2KTA19-G2KTA19-G2KTA19-G2
KTA19-G2KTA19-G2KTA19-G2KTA19-G2KTA19-G2
KTA19-G2KTA19-G2KTA19-G2KTA19-G2KTA19-G2
——END——

General Infomation of DCEC 6BT5.9-C115 Industrial Engine

Engine Model6BT5.9-C115Emission StandardN / A
Rated Power115 HP @ 2000 RPMPeak Torque430 N.m @ 1500 RPM
Curve&DatasheetFR91470Displacement5.9 L
Compression Ratio16.8: 1Bore*Storke102 mm * 120 mm
No. Of Cylinders6 Cylinders, in LineGovernor Regulation8 %
Fuel SystemWeifu PW Pump / RSV Mechanical GovernorWet Weight432 kg
AspirationTurbochargedConfigurationD40
CPL Code Revision1189-02Packing Size(L*W*H)1026 mm * 699 mm * 912  mm

Installation Data of DCEC 6BT5.9-C115 Industrial Engine

Moment Of Inertia Of Rotating Components (No Flywheel)0.25 kg·m2Max. (Static) Bending Moment At Side Pad Mounting SurfaceN/A
Center Of Gravity From Front Face Of Block391 mmMax. (Static) Bending Moment at Rear Face of Block1356 N.m
Center Of Gravity Above Crankshaft Centerline140 mmInstantaneous Inertia of the Finished Engine- Double Shaft16.5 kg·m2
Max. (Static) Bending Moment At Front Support Mounting Surface435 N.mInstantaneous Inertia of the Finished Engine- Pitch Axis41.1 kg·m2
Instantaneous Inertia of the Finished Engine- Partial Rotation35.4 kg·m2

Performance Data of DCEC 6BT5.9-C115 Industrial Engine

Min. Idle Speed750 RPMThrottle Handle Angle – Low Idle75±4°
Max. Speed Adjustment Speed (10% Rated Load)2160 RPMThrottle Handle Angle – Rotation Angle42±5°
Max. Overspeed Performance3750 RPMParking Handle Angle – Free Position94±4°
Max. Altitude Allowed for Continuous OperationN/AParking Handle Angle – Parking Position32±4°
700 RPM Full Throttle Closed Torque (900 RPM Idle Speed)N/AUltimate Load Of Thrust Pad – Instantaneous Max.3425 N
Throttle Handle Angle – High Idle102±4°Ultimate Load Of Thrust Tile – Max. Continuous Load1112 N
——END——

Engine Performance Data Rated Power of DCEC 6BT5.9-C115 Industrial Engine

Rated PowerTorque PeakRated PowerTorque Peak
Engine Speed2000 RPM1500 RPMExhaust Gas Temperature450 °C510 °C
Gross Power Output85 kW68 kWHeat Rejection to AmbientN/AN/A
Torque406 N.m430 N.mHeat Rejection to Coolant73 kW53.6 kW
Intake Manifold Pressure110 kPa75 kPaHeat Rejection to Fuel0.5 kW0.3 kW
Friction Horsepower15 kW11 kWEngine Coolant Flow2.7 kW2.0 kW
Turbo Comp. Outlet Pressure115 kPa80 kPaExternal Cooling Circuit ResistanceN/AN/A
Intake Air Flow172 l/s125 l/sAltitude Limitations-Intermittent3500 m3500 m
Exhaust Gas Flow433 l/s310 l/sAltitude Limitations-Continuous3000 m3000 m
Turbo Comp. Outlet Temperature140 °C110 °CSteady State Smoke1.5 Bosch1.5 Bosch
  The picture of Performance Curve-DCEC Cummins 6BT5.9-C115 Industrial Engine  

System Technical Data of DCEC 6BT5.9-C115 Industrial Engine

Exhaust SystemMax. Exhaust Back Pressure76 mmHg
Exhaust Pipe Size Normally Acceptable75 mm
Max. Static Supported Weight at the Turbocharger Outlet Flange13.5 N.m
Exhaust Manifold Insulation AcceptableNo
Turbocharger Insulation AcceptableNo
Air Intake SystemMax. Intake Air Restriction with Heavy Duty Air Cleaner-Dirty Element381  mmH2O
Max. Intake Air Restriction with Heavy Duty Air Cleaner-Clean Element635  mmH2O
Min. Dirt Holding Capacity with Heavy Duty Air Cleaner53  l/s
Max. Temperature Rise from Ambient to the Inlet of the Turbocharger17 ℃
Max. Pressure Drop from the Turbocharger Outlet to the Intake ManifoldN/A
Lubrication SystemNormal Operating Oil Pressure Range200-450 kPa
Max. Lube Oil Flow for Engine Accessories4 l/m
Max. Sump Oil Temperature121 °C
Min. Engine Oil Pressure for Engine Protection Devices-At Rated Speed and Load270 kPa
Min. Engine Oil Pressure for Engine Protection Devices-At Torque Peak Speed and Load209 kPa
Min. Engine Oil Pressure for Engine Protection Devices- At Low Idle69 kPa
Min. Required Lube System Capacity-Sump Plus Filters16.3 L
By-Pass Filtration RequiredNo
Angularity of Standard Oil Pan-Front Down35°
Angularity of Standard Oil Pan-Front Up35°
Angularity of Standard Oil Pan-Side to Side35°
Cooling SystemCoolant Capacity-Engine Only9.9 L
Max. External Engine Cooling Cycle Resistance34 kPa
Min. Pump Inlet Pressure with Open Thermostat and no Pressure CapN/A
Max. Static Head of Coolant Above Engine Crankshaft CenterlineN/A
Standard (Modulating) Thermostat Range82-93 ℃
Max. Block Coolant Pressure with Closed Thermostat and no Pressure Cap276 kPa
Min. Pressure Cap Pressure50 kPa
Max. Engine Coolant Temperature at Engine Outlet100 ℃
Max. Engine Coolant Temperature for Engine Protection Devices101.6 ℃
Min. Engine Coolant Temperature71 ℃
Min. Fill Rate19 l/m
Max. Initial Fill Time5 min
Min. Coolant Expansion Space6%
Max. Deaeration Time25 min
Min. Drawdown of Total System Capacity (Drawdown Must Exceed the Volume Not Filled at Initial Fill & Must Not Include Expansion Space)11%
Fan-on Engine Coolant Outlet Temperature93 ℃
Shutter Opening Coolant Outlet Temperature85 ℃
Cold Starting SystemMin. Battery Capacity-Cold Soak-18 °C or Above, Engine Only – Cold Cranking Amp.950 CCA(12V)
Min. Battery Capacity-Cold Soak-18 °C or Above, Engine Only – Reserve Capacity260 min
Max. Pressure Drop of Starting CircuitN/A
Min. Ambient T Emperature for Unaided Cold Start-12 ℃
Min. Cranking Speed Required for Unaided Cold Start125 RPM
Breakaway Torque at Min. Unaided Start TemperatureN/A
Cranking Torque at Min. Unaided Start TemperatureN/A
Cranking Torque at -10°FN/A
Fuel SystemMax. Fuel Flow on the Supply Side of the Fuel Pump190 l/hr
Max. Fuel Inlet Restriction-With Clean Fuel Filte102 mmHg
Max. Fuel Inlet Restriction-With Dirty Fuel Filter203 mmHg
Max. Fuel Drain Restriction-With Check ValvesN/A
Max. Fuel Drain Restriction-Less Check Valves510 mmHg
Max. Fuel Inlet Temperature71 °C
Min. Fuel Tank Air Venting Capability Required at 6 in. H2O Back Pressure340 l/hr
——END——

 

Scopes of Supply of DCEC 6BT5.9-C115 Industrial Engine

Fuel System1. Fuel Transfer PumpExhuast System1. Exhuast Manifold
2. High-Pressure Fuel Pump2. Turbocharger
3. Fuel Filter3. Exhuast Elbow
Air Intake System1. Air Intake ManifoldStarting System1. Starter Motor
2. N/A2. Starter Rely
Cooling System1. Water PumpPower Output System1. Flywheel
2. Engine Fan2. Standard Flywheel Housing
3. Standard Radiator3. N/A
Lubricating System1. Oil PumpCharging System1. Charging Alternator
2. Oil Filter2. N/A
Engine Shut-Down System1. Engine Fuel Shut-Off SolenoidrEngine Mounting System1. Engine Mouting Bracket
Engine Auiliary Accessories1. Air Compressor
——END——

Optional Accessories of DCEC 6BT5.9-C115 Industrial Engine

Air Intake System1. Air Intake Pre-HeaterExhuast System1. Muffler & Bellows
2. Air Intake Shut-Off Valve2. Flame Trap
3. Air Filter3. Spark Arrestor Type Muffler & Bellows
4. Air Intake Pre-Filter4. Dpf System
5. Air Filter Alarm System5. N/A
Fuel System1. Coarse FilterLubricating System1. Oil Pre-Heater.
2. Fuel Pre-Heater2. N/A
Starting System1. Manual Magnetic Dc ContactorCooling System1. Silent Type Radiator
2. Dual Ears Flywheel Housing2. Plateau Radiator
3. Spring Starter Motor3. Salt-Spray Resistant Radiator
4. Air Starter Motor4. Coolant Pre-Heater
5. Hydraulic Starter Motor5. Jacket Water Heater
6. Manual Magnetic Dc Contactor6. N/A
Engine Auiliary Accessories1. Hydraulic Oil PumpControl System1. Can Add Engine Monitoring System, Contro System With Wiring Harness.
2. Air Conditioner Compressor2. Can Add Self-Protection System that Integrated with Alarm System.
Power Output System1. ClutchEngine Mounting System1. Shock Absorber Pad
——END——

Committed to Providing Stable and Reliable Premiem Power System for Global Construction Machinery Manufacturer Partners, ConeMac is A Sub-Brand of the EMAC Group that Focuses on Construction Equipment Application.ConeMac’s Ranges of Products Mainly Inclduing Marine Construction Engines Power Pack, Construction Equipment Gearbox, Gear Reducer, Explosion-Proof Engines, Generator Set and Water Pump Set for Mining, Oil and Gas Field.For More Information of Our Industrial Power System Products, You Are Welcome to Visit ConeMac Homepage: Conemac.cn

Modifiable Components of DCEC 6BT5.9-C115 Industrial Engine

Air Intake System1. Installation Position of Air FilterCharging System1. 12V charging Alternator for 12v Electric System
2. Upgrade to Heavy-Duty Type Air Fitler2. Explosion-Proof Charging Alternator
3. N/A3. Upgrading to Specified Brand and Speicifications of Charging Alternator
Exhuast System1. Water-Cooled Exhuast ManifoldLubricating System1. Oil Pan Position
2. Water-Cooled Turbocharger2. Number of Dipstick
3. Can Modify Installation Position and Direction of Turbocharger3. Position of Dipstick Can Choose from 6 Positions
4. N/A4. Can Modify Oil Filter to be Remote Installation
Engine Shut-Down System1. 12V Solenoid for 12v Electric SystemStarting System1. Upgrading to Specified Brand and Speicifications of Starter Motor
2. Explosion-Proof Solenoid2. 12V Starter Motor for 12v Electric System
Fuel System1. Upgrade to Fuel Fitler that Integrated with Fuel Transfer Pump and Fuel Pre-HearterEngine Auiliary Accessories1. All of auxiliary System can Choose Specified Brands and Specifications.
2. N/A2. Additional Auxiliary Systems Can be Added for Special Applications.
Cooling System1. Can Modify Engine fan Into Blower Fan or Suction FanPower Output System1. Can Modify Size of Flywheel Housing and Flywheel.
2. Can Modify Central Position of Engine Cooling Fan2. Dual-Ear Flywheel Housing (For Twin-Starter System)
3. Can Choose Type of Engine Fan From Mechanical Type or Electric Type3. Some of Models can Modify Flywheel Housing Into PTO Integrated Type.
4. N/A4. Engine Have Connecting Port of PTOs, That Able to Provide Power Output.
Engine Mounting System1. Can Modify Engine Mouting Bracket.
——END——
 

Note: All Above Data are Just for Reference, All Data Might Change Without Notices or Updates, Please Contact Our Sales Team to Confirm All Details Via WhatsApp or Email.

WhatsApp Online logo

Sales Team


Marine Sales - Mrs. Gazit Wong WhatApp-Icon

Train Sales - Mrs. Gazit Wong WhatApp-Icon

Automotive Sales - Mrs. Shelly Liu WhatApp-Icon

Industrial Sales - Mrs. Kitty Chen WhatApp-Icon

Generator Sales - Mrs. Erica WhatApp-Icon

Pump Sales - Mrs. Ryen WhatApp-Icon

Spare Parts - Mrs. Nora Chen WhatApp-Icon

Sales Manager - Mrs. Wendy Fu

Ventas españolas - Victoria

Sales Director - Mr. Jasper Lee       WhatApp-Icon

Contact EMAC Now!

Subscribe To Our Newsletter

Subscribe To Our Newsletter

Subscribe to get the latest updates from www.ccec-generator.com

You have Successfully Subscribed!

Pin It on Pinterest